FLEX XC 3401 VRG Orbital Polisher
The orbital rotation of this innovative polisher simulates the circular movement of the human hand while polishing. At the same time, the polisher's highly smooth running facilitates a careful, precise finish and even offers what is necessary for hologram-free polishing.
That's just what this polisher, with its ergonomically designed knob handle, was made for. The positive drive ensures a uniform movement, even under load, thanks to constant lift.
Taken in conjunction with the large stroke length there is also the possibility of removing existing holograms from black finishes. Thanks to the direct orbital drive, very little heat develops on the surface, which is ideally suited to temperature-sensitive finishes.
The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal speed. Note: the machine's orbital movement has been optimally adapted for the special back pad included with it.
Max. pad diameter: 6.5" (160 mm)
Velcro backing plate: 5.5" (140 mm)
Speed without load: 160-480
Orbit Rate without load: 3200-9600 rpm
Power input: 900 Watts (10.9 Amp)
Power output: 590 Watts
Orbit: 8 mm
Weight: 5.75 lbs / 2.6 kg
1 year Warranty
Speed without load:
1 - 160/min
2 - 210/min
3 - 270/min
4 - 330/min
5 - 400/min
6 - 480/min
Positive-drive orbital polisher:
- Forced rotation to increase the power of cut.
- VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, over-load protection, temperature monitoring and speed selection.
- 5/16" (8 mm) orbit for high efficiency.
- Permanent direct drive for an even polished surface.
- Cushioned special hook and loop pad for polishing.
- Removable, ergonomic handle and guard for optimum handling in all applications.
- Low heat generation on the surface makes it ideal for temperature-sensitive paints.
- Counterweight for smoother operation.
- Low height and low weight.
- Spindle lock.
- 10' power cord.
- 1 grip cover
- 1 knob grip
- 1 special Velcro Backing Plate, 5.5"
|Item ID||XC 3401 VRG|
|Type of Polisher||Dual Action (DA)|
|Type of Dual Action Polisher||Forced Rotation|